Safety valve in the chemical industry advantage is reflected in where?

In the chemical industry, the safety valve to ensure the effective use of staff's safety production, as well as their physical and mental health workers. And why only that chemical companies to choose safety valve it? Its advantages embodied in those areas? First, because the safety valve of Static-tight seal, with such safety valve is in operation, it is possible to completely prevent media leaks. Safety valve to use, no use of a separate lubricant and cooling water, reduce input costs, but also reduce energy consumption.
Safety valve is to synchronize the rotation of the coupling drag, friction and will not have any contact with. Natural Gas Safety Valve to reduce the impact of vibration motor, and the impact caused when the vibration of the motor. In the medium through, the amount of lubricating the inner and outer magnetic rotor will be relative to the safety valve and the motor has a protective effect. Valve actuator in the case of work, but also may appear stuck phenomenon, magnetic rotator will automatically fall off, to protect the body does not hurt.

Applications Hydraulic safety valve

Hydraulic valve is widely used in hydraulic power systems and hydraulic equipment safety devices, but also can be used as pressure limiting device, is a special valve, which is different from the conventional valve, conventional mechanical valve metal spring as a driving force, only Low pressure can limit encountered more pressure than 10Mpa limit pressure, can only increase the volume of pressurized to do design, traditional pressure limiting valve acts on the high pressure and ultra-high pressure hydraulic power systems and hydraulic equipment necessarily bulky , complex, difficult to manufacture large, high production costs; in the course of large metal spring fatigue change ambassador pressure limiting parameter fluctuations, often adjust in order to ensure normal use. Since large steel spring material can not be anti-corrosion materials such as stainless steel production, poor product corrosion resistance, valve life is not long.
"Pneumatic valve" using high-pressure gas as power source, use to change the size of the cylinder head and Natural Gas Safety Valve body proportion design, product structure is simple, small size, limited pressure stability can be achieved from 0.1 Mpa Mpa of thousands limit pressure, significantly reduce product cost. By "pneumatic safety valve" effect also specially designed pillar pressure gas cooker safety valve in the hydraulic mine support system. Achieve a slow process of formation pressure to bear so that the pressure (that varies with the pressure to maintain a constant pressure formation pressure) and fast so that the pressure (ie, roof collapse pressure instantaneous relief emptied within one second) in order to ensure that equipment and personnel lossless Security.

Meaning continuous improvement where hydraulic valve

With the study of the safety valve, safety valve structure to improve and perfect performance, provides a valuable theoretical and practical basis, in order to ensure stable operation of hydraulic support, fully mechanized coal face of production safety have some practical significance for hydraulic support . Hydraulic support as a safety valve control system, the key element to maintain the entire stent system safe and efficient operation. So for the design of safe, reliable, durable and high flow valve has been the focus of scientific research today, the gas brass safety valve for the study conducted a comprehensive study. Liquid flows through the orifice in the maximum speed, the opening of different size and pressure of the overflow speed also has the most direct impact.
With the increase of inlet pressure, flow speed increases, the minimum pressure at the orifice becomes smaller, and thus prone to cavitation, whirlpool and so on. The larger and smaller openings of the pressure, at maximum speed, the greater the orifice. Safety valve pressure drop is mainly distributed in the orifice at the orifice in the vicinity there is a clear area of ​​low pressure, and the smaller the opening degree, low pressure is smaller; the greater the pressure, the low pressure is smaller.

External pilot valve opening and closing parts of factors

Pilot valve is a safety valve. Pilot valve opening and closing parts by the external force is normally closed state, when the media pressure equipment or pipeline increases, exceeds a predetermined value open automatically discharged outside the system through the media to protect the pipeline or equipment medium pressure exceeds values ​​specified.
Pilot valve is mainly used for boilers, pressure vessels and piping, control pressure does not exceed a predetermined value, for personal safety and equipment operation plays an important protective role. All kinds of safety valve should be mounted vertically, the outlet Water Heater Gas Valves should be no resistance, to avoid compression phenomenon. Gas Valves For Patio Heater before installation should be devoted to test and check their tightness. The use of the safety valve should be checked regularly.

Commonly used materials cryogenic safety valve brief

Suitable for cryogenic Gas Heater Control Valve (-100 ~ -30 ℃) of the host material has a low temperature and low pressure parts of austenitic stainless steel ferritic and martensitic steels. Low-temperature austenitic stainless steel have ASTM A351 CF8M, CF3M, CF8 and CF3, ASTM A182 F316, F316L, F304 and F304L, ASTM A433 316,316L, 304,304L and CF8D. Low pressure parts ferritic and martensitic steels have ASTMA352LCA (-32 ℃), LCB, LCC (-46 ℃), LC1 (-59 ℃), LC2, LC211 (-73 ℃) and LC3 (-100 ℃). ASTMA352 standard primary lower material prices, but its chemical composition smelting must have a reliable and require very strict internal control standards plants. Heat treatment process is complex, requiring multiple for quenching, so as to achieve low-temperature impact toughness requirements of the standard requirements, long production cycle. Low temperature impact toughness can not reach the standard, it does not allow for feeding cold steel.
Therefore, only the production volume, and can become a smelting furnace when used, and in general, the choice of austenitic stainless steel.

Selection of the following aspects should be considered a safety valve

Design of the choice of what type of safety valve, mainly determined by the characteristics of the process conditions and the working medium of the device. Under normal circumstances, boilers, pressure vessels, most use a spring-loaded safety valve. If the working medium container of toxic, flammable and explosive, the selection of a closed valve. Boiler and pressure vessel and safety discharge larger wall thickness and less affluent, and the best selection of low-pressure vessel safety valve.
Pressure relief valve is based on nominal range of design and manufacturing standard series, each Water Heater Gas Valves unit has a certain working pressure range. Boilers and pressure vessels shall be the selection of the appropriate choice of the maximum allowable working pressure safety valve.
Selection of safety valve emissions, its emissions must be greater than safety discharge device, so as to ensure the boiler or pressure vessel overpressure Aluminum safety gas valve can be discharged in the open part of the media, to avoid the pressure continues to rise inside.

Safety valves and other valves of different

Safety valve is special equipment (boilers, pressure vessels, pressure piping, etc.) a limit on the pressure relief safety play an important role in the annex. Reliability and performance of its action is directly related to equipment and personal safety, and closely related to energy conservation and environmental protection. But the safety valve and other Pilot operated safety valve can play a similar role at times confusing, it should be clear the following points:
1, the safety valve is mounted directly on the special equipment, the management and performance to meet the quality and technical supervision departments and relevant special equipment requirements. It is a static pressure from the valve before the media - driven automatic pressure relief device. Characterized by a sudden opening of the full opening action. For gas or steam occasions.
2, relief valves and patio heater gas valve on the structure and performance similar to his, are more than open automatically discharge pressure inside the media, in order to ensure the safety of the device. Relief valve, also known as relief, is a static pressure from the valve before the media - driven automatic pressure relief device. It opened with the pressure exceeds the force increase proportionally open. Mainly used for fluid applications.
3, safety relief valve, also known as safety relief valve is a pressure-driven by the media automatic pressure relief device. Use different according to both valid for the safety valve is also valid for the relief valve.
4, emissions by the required safety valve, relief valve no specific demands. In general, the safety valve should be more reliable than the relief valve.