Water Heater Gas Valves is connected to the intake valve and the water heater installed in the inlet pipe at the outlet of the water heater, the water heater is a very important protective device. When the water heater heating or water, or outside pressure is too large, it will increase the pressure on the water heater. A certain pressure relief valve set value, when the pressure on the water heater exceeds the safety valve setting value, the valve will be action, and the water discharge pipe from the relief valve of the mouth, which is a normal phenomenon . So in order to remain within a certain tank pressure range, the interior part of the water, gas discharge, and thus play a very good interior protection.
Control valve consists of two major assemblies components: body assembly and actuator assembly (or actuator systems), is divided into four series: single-seat series control valves, control valves seater series, sets cylinder series control valves and self-series control valve.
2016年1月12日星期二
2016年1月9日星期六
Water heater safety valve orifice
Water Heater Gas Valves orifice effluent treatment
Water heaters in use, when the water pressure is too great when it will lead to the water heater in vapor pressure greater than the pressure relief gas safety valves, then the case will appear a small amount of water, temperature control is damaged, the water heater has been in heated. In solving the problem, you can install or allow the outlet valve is open at the front of the water heater inlet.
2016年1月5日星期二
How to install the water heater safety valve
How to install the Water Heater Gas Valves
There is an arrow on the Gas Valve For Water Heater, the direction towards the water heater is added water, and a one-way valve. Remember not the opposite of installation. The termination tank, under termination mixing valve, are being deducted. Relief outlet should not be blocked, which depends on the water temperature is high pressure when it relief, to ensure safety.
There is an arrow on the Gas Valve For Water Heater, the direction towards the water heater is added water, and a one-way valve. Remember not the opposite of installation. The termination tank, under termination mixing valve, are being deducted. Relief outlet should not be blocked, which depends on the water temperature is high pressure when it relief, to ensure safety.
2016年1月1日星期五
Electric Water Heater Gas Valves The valve is very important. Called gas safety valve relief valve installed in the intake areas, mainly in the heating process is to ensure timely resolve the pressure too much pressure to ensure safe usage, it is generally the safety valve during heating will drop out. But it does not mean that when heated will drip, if the water pressure in the range will not bear the safety valve dripping. To prevent water back, guaranteed state is full of water in the machine, avoid dry when water supply.
订阅:
博文 (Atom)