2015年12月19日星期六

Gas Valve For Water Heater pipe thread

1. Optional visual Water Heater Gas Valves surface should be no trachoma; plated surface should be uniform gloss shall watch for peeling, cracking, burning, exposed bottom, peeling, dark spots and obvious defects such as pitting; spraying the surface should be fine organization , smooth and uniform, not a stream linked to defects such as exposed at the end. The defect will directly affect the life of the valve.
2.Gas Valve For Water Heater pipe thread is connected with the pipeline, in the purchase of visual thread whether the surface dents, broken teeth and other obvious defects, with particular attention to the pipe thread and connector screwed effective length will affect the seal of reliable sex, pay attention to the effective length of pipe thread when purchasing. Generally cylindrical pipe thread DN15 effective length of about 10mm.
3. The valve, ball valve is generally on their body or handle marked with nominal pressure, can choose according to their needs when purchasing.
4. Replace the existing gate or ball, you want to find out the length of the structure, so can not be installed after purchase.
Pipe thread 5. Triangle valve has two internal thread and external thread, to choose according to needs; also note that there are some triangular zinc alloy valve on the market today, the valve is priced lower than the average product, but corrosive and cause breakage.

没有评论:

发表评论